TO-Can / LED LaserMounts
The TO-Can and LED LaserMounts support TO-Can and LED devices with active cooling, and easy configuration and device connections.
The 224 provides a temperature controlled solution for TO-cans, while the Micro 5.6 and Micro 9 mounts are inexpensive device clamps for low cost fixturing of TO-can devices. The 234 is a more powerful version of the 224, and supports high power TO-can devices as well as 2-pin devices.
The 226 is an excellent solution for LED applications where temperature stabilization is needed. Connections are easy with the 2mm banana jacks on the side of the mount, making it easy to connectorize your device. In addition to the STAR hole pattern, the 226 also features a grid of additional holes in a “breadboard” pattern, which be used for mounting custom devices.
DB-9 & DB-15 Interfaces
Each mount makes its laser driver and temperature controller connections through a DB-9 LDD and a DB-15 TEC connector on the back of the mount. This allows for quick connections to any Arroyo Instruments controllers.
A product brochure covering all of our products is available here.
Select Model for more information
|224-C-01||Standard cover, 30mm cage support||$35|
|224-C-02||Opto-mech cover, 30mm cage and 1" lens tube||$35|
|224-C-03||Cover for fiber pigtailed lasers||$35|
|226||LED||Yes||STAR LEDs, breadboard hole pattern||$295|
|234B||TO-Can||Yes||10W capacity, wide temperature range||$595|
|234-C-02||Opto-mech cover, 30mm cage and 1" lens tube||$45|
|Micro 5.6||TO-5.6||No||Device clamp, pedestal mount||$29|
|Micro 9.0||TO-9||No||Device clamp, pedestal mount||$29|