The 4400-60-14 LaserSource provides up to 60A of current at up to 14V compliance, with excellent noise and accuracy specs. The 4400-60-14 is an excellent choice for applications that demand high compliance voltages, such as laser modules with several diodes in series. It supports both CW and Quasi-CW (QCW) mode.
In addition to the primary laser output, the 4400 includes control of a secondary pilot (or pointing) laser that is often integrated into high power laser modules.
Simple User Interface
The user interface is remarkably simple… so easy to use, you’ll have it up and running in no time. Unlike other instruments which rely on 7-segment LED displays and a confusing array of indicators and buttons, the 4400 instead presents information on a high contrast VFD display in an easy-to-read format., and displays current, voltage, and photodiode current simultaneously… no need to toggle though the readings as you would on most instruments. Settings and error messages are in clear English, not cryptic codes and flashing status lights.
Quasi-CW (QCW) Mode
The 4400 includes QCW mode, as many applications require the low duty cycle, high current pulses that QCW offers to manage thermal loading on the device.
Standard Computer Interfaces
The 4400 includes both USB and RS232 computer interfaces, allowing for quick and easy connection to a PC for remote operation. In addition, the LaserSource’s command set is compatible with ILX and Newport controllers, allowing you to leverage any existing software you may have already developed.
Ground Loops Eliminated
Like all LaserSources, the 4400 includes isolated inputs and outputs. In technical terms, this means that every input and output signal is electrically isolated, so that offset voltages, ground connections, and AC noise will not “bleed” into other parts of the electronics. Even the photodiode input is fully isolated from the laser output, ensuring full isolation of the laser output. In practical terms, this means it’s impossible to create a ground loop through the LaserSource, a common problem in laboratory setups where several different instruments are used in the same test. No other driver on the market has this capability.
The 4400 supports analog modulation via a front panel BNC for arbitrary control of the current output using an external function generator or other voltage source.