Call Us (800) 644-0416 Toll Free

213 DIL LaserMount

US List Price* How to Buy
213 DIL LaserMount

The 213 DIL LaserMount is an excellent choice for electrical connection and passive cooling of DIL laser modules.

Mini-DIL Support
The 213 can also be used for mini-DIL lasers, although only electrical connections can be made.

Quick Laser Connections
The 213 makes connections to the laser quick with a zero insertion force socket… simply slide the laser into the socket, screw the device to the mount for passive cooling, and close the lead clamp to make electrical connection. The lead clamps are user replaceable for easy maintenance in production applications.

Looking For Active Cooling?
If you are looking for a DIL mount that includes active TEC cooling, take a look at the 215 TEC DIL LaserMount.

  • 14-pin DIL Lasers
  • 8-pin mini-DIL Lasers (electrical only)
  • Zero insertion force (ZIF) connection
  • Solder-less wiring
  • Passive cooling



Beyond the mount itself, the 213 works with our optional fiber tray, device cover, and fan base:

The 200-TRAY fiber tray bolts directly to the top of the mount and makes fiber management simple.

The 200-C cover enhances the stability of the laser by minimizing the impact of ambient air currents.

The 200-FAN fan base significantly increases the heat sink performance, from 3°C/W to 1.5°C/W.

Easy Wiring
The underside of the mount houses a simple screw terminal wiring setup, with all wires color coded, and the terminals clearly marked to make wiring the mount for your device as easy as possible.

DB-9 & DB-15 Interfaces
The laser driver and temperature controller connections are made through a DB-9 LDD and DB-15 TEC connector on the side of the mount, which allows for quick connections to any Arroyo Instruments controllers.


    Laser Package Supported

14-pin DIL or 8-pin mini-DIL
(mini-DIL electrical connection only)

    Input connectors
        Laser Diode

DB-9, male

        Laser TEC

DB-15, male

        Size (H x W x D) [in(mm)]

1.55(39) x 3.50(89) x 5.00(127)

        Mounting holes

¼-20 through-hole, 3” on center (x2)

        Device mounting screws

4-40 x ¼” Socket Head Cap Screw