The 215 TEC DIL LaserMount provides active TEC cooling for DIL lasers that lack an internal Peltier cooler, or for manufacturing applications where case temperature control is an important part of device qualification.
Quick Laser Connections
The 215 makes connections to the laser quick with a zero insertion force socket… simply slide the laser in the socket, screw the device to the mount for active cooling, and close the lead clamp to make electrical connection.
The mount uses a 10K thermistor for temperature feedback. More details on working with thermistors can be found here.
Just Need Passive Cooling?
If your device already has an internal Peltier (TEC) cooler, and you only need passive cooling, take a look at the 213 DIL LaserMount.
- Active TEC cooling
- 14-pin DIL Lasers
- Zero insertion force (ZIF) connection
- Solder-less wiring
Beyond the mount itself, the 215 works with our optional fiber tray, device cover, and fan base:
The 200-TRAY fiber tray bolts directly to the top of the mount and makes fiber management simple.
The 200-C cover enhances the stability of the laser by minimizing the impact of ambient air currents.
The 200-FAN fan base significantly increases the thermal capacity, from 2W to 3.5W (25°C set, 25°C ambient).
The underside of the mount houses a simple screw terminal wiring setup, with all wires color coded, and the terminals clearly marked to make wiring the mount for your device as easy as possible.
DB-9 & DB-15 Interfaces
The laser driver and temperature controller connections are made through a DB-9 LDD and DB-15 TEC connector on the side of the mount, which allows for quick connections to any Arroyo Instruments controllers.
|Laser Package Supported||
|Temperature Range (°C)||
-5 to +85
|TE Module Imax (A)||
|TE Module Vmax (V)||
|Size (H x W x D) [in(mm)]||
1.55(39) x 3.50(89) x 5.00(127)
¼-20 through-hole, 3” on center (x2)
|Device mounting screws||
4-40 x ¼” Socket Head Cap Screw