280 Series TECMounts

At-a-Glance

Mounting Plates

  • All Copper Design
  • Standard Breadboard Pattern
  • Customizable Mounting Holes
  • Adaptor Plates Available

Cooling Mode

  • Active Heating & Cooling

Thermal Capacity

  • 30W (Model 284)
  • 50W (Model 285)
  • 100W (Model 286)

Also Includes:

  • Integrated Fan
  • External Temperature Switch
ModelDeviceTECFeatures
285-01 TECMount, M3VariousYes4" Breadboard, M3 Holes
285-01-150 TECMount, M3VariousYes4" Breadboard, M3 Holes, +150°C
286-01-150 TECMount, M3VariousYes4.2" Breadboard, M3 Holes, +150°C
284-03-150 TECMount, M2.5VariousYes3" dia., Breadboard, M2.5 Holes, +150°C
286-01 TECMount, M3VariousYes4.2" Breadboard, M3 Holes
284-03 TECMount, M2.5VariousYes3" dia., Breadboard, M2.5 Holes

280 SERIES FEATURES

The 280 Series TECMounts are designed to provide high thermal capacities in a compact and functional enclosure, with 30W and 100W models available. Precision engineered and ready to go right out of the box, these mounts come with a very flexible array of mounting holes and the temperature sensor built-in. Need to use the device for temperature feedback? No problem, you can easily wire in the device’s sensor and even select between device and internal temperature feedback with a switch on the mount.

The 280 Series Mounts are available in an optional high temperature configuration, allowing for operation up to 150°C, but retaining the temperature range and thermal capacity of the standard mount. Because thermistors do not perform well at high temperatures, the sensor is replaced with a high accuracy Pt 100 RTD sensor. There is additional cost for the high temperature configuration, please contact the factory for a quote.

Like many of our other mounts, the cold plate can be customized to fit the exact requirements of your application. We can put mounting holes just where you need them so your device mounts directly to the plate, without the need for adapters or modification.

ACTIVE HEATING AND COOLING

Built-in Peltier devices and a temperature sensor for bi-polar temperature control.

CUSTOMIZABLE COPPER COLD PLATE (MODEL 284 & 286)

100% copper cold-plate with mounting holes for common lasers and LEDs. Hard nickel plating for maximum performance and scratch resistance. Custom mounting configuration available.

CUSTOMIZABLE ALUMINUM COLD PLATE (MODEL 285)

100% aluminum cold-plate with mounting holes for common lasers and LEDs, and hard nickel plating for maximum performance and durability. Custom mounting configurations available.

FLEXIBLE MOUNTING SURFACE (MODEL 285)

Engineered to provide edge access on three sides of the cold plate.

TEMPERATURE SENSOR SWITCH

Does your device have an onboard temperature sensor? Flip a switch to bypass the mount’s cold plate sensor and send the signal directly to your temperature controller.